Oranje Natural wood protector 2k
The Oranje Natural wood protector 2k is a natural wood protector (2-component).
A colourless 2-component water-based hard lacquer (for indoor use) with a high degree of durability.
It gives wood an optimal and virtually invisible protective layer without discolouring the wood!
Suitable for untreated wooden furniture and floors (oak, teak, mahogany, cherry, pine, etc ..).
The surface area treated should get at least 2 layers of lacquer (on floors at least 3 layers).
Sand the untreated wood surface with grain P150-P180 and clear of grease and abrasive dust.
Do not sand previously coloured wood, as the coloured layer / Lacquer will be affected!
Do not process the lacquer in a space below ± 10 Celsius.
Before use, stir the wood protector well and do not dilute.
Then add the correct amount of hardener (8% = 1/12 part) while stirring.
After that, leave the lacquer to rest for 15 minutes and then process it within ± 2 hours onto the wood.
Pay attention! Only mix the amount of lacquer with the correct amount of hardener needed to treat the surface once (1 layer).
Apply the lacquer with a short haired (lacquer) roller or brush.
Prevent puddling or extreme layer thickness!
After drying of the first lacquered layer (± 4 – 6 hours), sand the surface with grain P280-320 sanding paper.
Then remove the abrasive dust and apply a second layer of lacquer.
We also recommend that you clean the used materials with water as soon as you are done.
Additional info: The lacquer may be sprayed (maximum spray nozzle 1.4 mm).
Dust dry after 1 hour, reapply able with lacquer after 4 – 6 hours.
The painted surface is lightly loadable after 16 hours and heavily loadable after ± 6 days.
± 1 year in original and well-closed packaging, after opening, limited shelf life.
Not frost resistant, so keep out of cold areas.
1 litre of lacquer is suitable for ± 12 – 14 m2 (1 layer)!
Take care of the painted surface at least 2x a year with Matt Polish.
500 ml tin (including harder)