Oranje Wood Colour Oil Staining Oil
Oranje Wood Colour Oil Staining Oil stains untreated wood and protects it immediately against moisture, heat and stains (optimal protection).
Colour oil has excellent abrasion resistance and gives the surface a fairly matte appearance.
Colour oil is available in different colours, namely:
• Light grey
Suitable for all untreated wood sources (including furniture and floors).
First sand the surface you want to treat with preferably P100 – P120 thick sanding paper.
After that make the surface dust and grease free.
Make sure to stir the Colour oil thoroughly and then apply with a roller or (wide) brush (or possibly a cloth).
Spraying the oil is also a possibility!
Let the applied layer dry for a few minutes and then rub it out with a firm non-fluffy (cotton) cloth.
After 2 – 4 hours, apply a second layer of Staining oil the same way you applied the first layer.
After 24 hours of drying, the Staining oil has reached the maximum curing (protection)!
During the use of Staining oil and drying of the product, be sure to ventilate the room!
Dried oil residue (in cloth, brush or roller) are flammable so be careful!
We therefore recommend that you rinse it with water before throwing it away.
Hardwoods (including oak): 2 layers of Staining oil.
Soft woods (including pine): 3 layers of Staining oil.
P.s. Multiple layers increase the degree of gloss!
Post-treatment / maintenance advice:
The treated surface will benefit by maintaining it with Greenfix (classic, grey or white) from Oranje.
Depending on the use of the object/furniture, repeat the maintenance treatment ± 1 to 2 times a year.
Depending on ambient temperature, allow the first layer to dry for a minimum of 2-4 hours before applying a second or possibly third layer.
After 24 hours of drying, the Staining oil has reached the maximum cure (protection)!
± 50 grams per m2 or 1 litre is sufficient for: ± 20 m2
2 years in original packaging.
1 litre can.